Command Line Interface4-744• File information is shown below:ExampleThe following example shows how to display all file information:whichbootThis command displays which files were booted when the system powered up.SyntaxwhichbootDefault SettingNoneCommand ModePrivileged ExecExampleThis example shows the information displayed by the whichboot command. Seethe table under the dir command for a description of the file information displayed bythis command.Table 4-26 File Directory InformationColumn Heading Descriptionfile name The name of the file.file type File types: Boot-Rom, Operation Code, and Config file.startup Shows if this file is used when the system is started.size The length of the file in bytes.Console#dir 1:file name file type startup size (byte)----------------------------------- -------------- ------- -----------ES3552XA_diag_v2.2.1.8.bix Boot-Rom image Y 214124ES3552XA_Opcode_V2.2.6.2.bix Operation Code Y 1749228ES3552XA_V2260.bix Operation Code N 1745500Factory_Default_Config.cfg Config File Y 5197-------------------------------------------------------------------------Total free space: 3345728Console#Console#whichbootfile name file type startup size (byte)------------------ ------------- ------- -----------ES3552XA_diag_v2.2.1.8.bix Boot-Rom image Y 214124ES3552XA_Opcode_V2.2.6.2.bix Operation Code Y 1749228Factory_Default_Config.cfg Config File Y 5197Console#
