Features and MenuCards Main Menu1126.2.7 MenuCard “Connections”Note: The availability of the following features will dependon the current call state of your telephone. These features arealso in the call-dependent MenuCards. Some entries in theConnections MenuCard are only shown when you pro-gramme the function onto a function key (please refer alsoto the chapter Programming Functions (Features) starting onpage 123).M P Select 6ƒConnections, then …select 1ƒCall pick-up, followed by …■ 1ƒPick-up: This accepts a call for another telephone in your pick-up group.If the person called is a member of a user group for which pick-up protection isactive, you can not pick up calls to their number.■ 2ƒPick-up select…: You can answer a call for any other telephone. To dothis, enter the call number of the other telephone. If the other terminal isalready in the call state (e. g. an answering machine is in announcementmode), you pick up the call. The person for whom you pick up the call mustbelong to a user group for which “Call seizure” authorisation is activated, oth-erwise the “Pick-up selective” function can not be used.If the person called is a member of a user group for which pick-up protection isactive, you can not pick up calls to their number.■ 3ƒUnpark call: “Unparks” a previously “parked” caller (see also MenuCard“Conversation” starting on page 59).Select 2ƒDial, followed by …■ 1ƒAnnouncement…: After entering the call number, you can initiate anannouncement on another system telephone. Under Dest.: enter the callnumber. Announcements can also be directed to call numbers at which severalcallers can be reached (see also Announcements (with and without Intercom)starting on page 70).■ 2ƒIntercom: Use this function to initiate an announcement to a singlesystem terminal, The microphone of the system terminal will be switched on
