A&D HW-10KGL Instruction Manual

Also see for HV-15KGL: Instruction manual

Contents

A&D HW-10KGL Instruction Manual Manual pdf 47 page image

HV-G/HW-G Series Page 45 13. Simple Batch FunctionCautionThe parameters of the upper limit value (HI) and a final value (HI) use thesame memory. The parameters of the lower limit value (LO) and thepreliminary value (OK) use the same memory.The upper/lower comparator function, the simple batch function and thefull/dribble batch function can not be used at the same time because theseparameters use the common memory.13.1. Preparation (Setting Parameters)Step 1 Turn off the display.Press and hold the ZERO key and press the ON/OFF key.The function table is displayed.Step 2 Press the ENTER key to display an item of thecomparator function ( f6 ).Step 3 Select a parameter of the simple batch function( f6 8 ) with the ∧ key.Step 4 Press the ENTER key and the F key to display end .Step 5 Press the ENTER key to return to the normal weighingmode.