AEG FAVORIT 65002 I User Manual

Also see for FAVORIT 65002 I: User manual

AEG FAVORIT 65002 I User Manual Manual pdf 39 page image

Problem Possible cause Possible solutionThe quantity of detergentwas too much.Make sure that you add thecorrect quantity of detergentin the dispenser before youstart a programme.Dry water dropstains on glassesand dishes.The released quantity ofrinse aid was not sufficient .Increase the released quanti-ty of rinse aid.The quality of the detergentcan be the cause.Try a different brand of de-tergent.The dishes are wet. • The programme had nodrying phase.• The programme had alow temperature dryingphase.For better drying results,keep the door ajar for someminutes.The dishes are wetand matt.The rinse aid dispenser isempty.Make sure that there is rinseaid in the rinse aid dispenser.The quality of the rinse aidcan be the cause.Try a different brand of rinseaid.The quality of the combidetergent tablets can bethe cause.• Try a different brand ofcombi detergent tablets.• Activate the rinse aid dis-penser and use the rinseaid together with the com-bi detergent tablets.Activating the rinse aiddispenser with the multitabfunction activated1. Press the on/off button to activatethe appliance.2. Make sure that the appliance is insetting mode. Refer to ‘SETTINGAND STARTING A PROGRAMME’.3. Press and hold Delay and Start atthe same time until the indicators(A), (B) and (C) flash.4. Press Option .• The indicators (A) and (C) go off.• The indicator (B) continues toflash.• The display shows the setting ofthe rinse aid dispenser.OffOn5. Press Option to change the setting.6. Deactivate the appliance to confirm.7. Adjust the released quantity of rinseaid.8. Fill the rinse aid dispenser.TECHNICAL INFORMATIONDimensions Width / Height / Depth (mm) 596 / 818 - 898 / 575Electrical connection Refer to the rating plate.Voltage 220-240 VFrequency 50 HzENGLISH 39