AEG BP5304001 User Manual

Also see for BP5304001: User manual

AEG BP5304001 User Manual Manual pdf 30 page image

122. Pull the rear end of the shelf sup-port away from the side wall and re-move it.Installing the shelf supportsInstall the shelf supports in the oppositesequence.Valid for telescopic runners:The retaining pins on the tele-scopic runners must point to thefront.10.3 LampWARNING!There is a risk of electrical shock.The lamp and the lamp glasscover can be hot.Before you change the lamp:• Deactivate the appliance.• Remove the fuses from the fuse box ordeactivate the circuit breaker.CAUTION!Put a cloth on the bottom of theinterior of the appliance. It pre-vents damage to the lamp glasscover and the cavity.Always use the same lamp type.Replacing the lamp at the cavityceiling:1. Turn the lamp glass cover counter-clockwise to remove it.2. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.Replacing the lamp on the left side ofthe cavity.1. Remove the left shelf support.2. Use a narrow, blunt object (e.g. ateaspoon) to remove the glass cov-er. Clean the glass cover.3. Replace the lamp with a suitable 300°C heat-resistant lamp.4. Install the glass cover.5. Install the left shelf support.30 www.aeg.com