AEG BE2003021 User Manual

Also see for BE2003021: User manual User manual User manual User manual

Contents

AEG BE2003021 User Manual Manual pdf 18 page image

Removing the shelf supports1. Pull the front of the shelf supportaway from the side wall.212. Pull the rear end of the shelf sup-port away from the side wall and re-move it.Installing the shelf supportsInstall the shelf supports in the oppositesequence.The rounded ends of the shelfsupports must point to the front.10.3 Oven ceilingYou can remove the grill to clean theoven ceiling more easily.WARNING!Deactivate the appliance beforeyou remove the grill. Make surethat the appliance is cold. Thereis a risk of burns.1. Remove the screw which holds thegrill. For the first time, use a screw-driver.2. Carefully pull the grill down.3. Clean the oven ceiling with a softcloth with warm water and a clean-ing agent, and let it dry.4. Install the grill in the opposite se-quence.WARNING!Make sure that the grill is correct-ly installed and that it does notfall down.10.4 Oven lampWARNING!Be careful when you change theoven lamp. There is a risk of elec-trical shock.18 www.aeg.com