ADTRAN 200410L1 User Manual

Contents

ADTRAN 200410L1 User Manual Manual pdf 52 page image

Chapter 5. Configuration Menu5-8 ESU LT User Manual 61200410L1-1ALARMSUsed to initialize the method by which the control porthandles alarm conditions.TRAPSDetermines if alarm conditions should automatically sendalarm messages (traps) to the controlling PC. The setting isfor this unit, or for slaves if this unit is a master.Choices: ENA, DISAOUTPUTSelects whether the alarm traps (if enabled) are sent directly,or if the telephone number stored in the ESU LT should bedialed first (industry-standard AT dial command sent tomodem).Choices: DIRECT, DIALTEL NUMThis is the telephone number which is dialed to obtain alarmtraps. The string can be up to 20 characters in length and isterminated with a semicolon (;) as the last character. A colon(:) character is used to represent a pause in the dial string.For example, for number 9:5551212; dial 9, pausemomentarily and then dial 5551212. This pause could benecessary to access an outside line, such as a PBX.When editing a specific character, the arrows are used toscroll from 0 to 9, then colon (:) and semicolon (;). The newtelephone number is entered into the ESU LT only uponpressing Enter after typing the semicolon.Choices: 20 digits (0-9, :, and ;)The typed digits are accepted only after pressing Enter.