ADTRAN 200410L1 User Manual

Contents

ADTRAN 200410L1 User Manual Manual pdf 37 page image

Chapter 3. Operation61200410L1-1 ESU LT User Manual 3-7To Set the Data FieldData fields that are available for editing are preceded by acolon (:).To View Display-Only Data FieldsAn example of a D ISPLAY O NLY data field is found byselecting the following menu choices:To Exit Any Menu Field Operation or DisplayPress Cancel as many times as required to return to thedesired menu level.Step Action1 Press Enter while the cursor is located on the submenuitem number. The cursor moves to the data field, to theright of the submenu item name.You can use theUp andDown Arrows to scan the availablevalue settings which display in the data field position, oneat a time.2 When the desired value is in the data field position,press Enter to set the value.The unit is set for the value shown in the data field and thecursor moves back to the submenu item position indicatingthe operation is complete.You can select another submenufield or pressCancel to return to the submenu.Cancel is available any time during the operation. If used pri-or to pressing Enter after making a data change, the originaldata value is restored and the cursor returns to the submenufield.Step Action1 Select STATUS from the MAIN MENU.2 Select submenu CURR ERR/ALM.LOSS OF SIGNAL INACTIVE/ACTIVE is displayed, giv-ing the current state of the alarm.