ADLINK Technology NuDAQ User Manual

Also see for NuDAQ: User guide User manual

Contents

ADLINK Technology NuDAQ User Manual Manual pdf 28 page image

16 Installation2.6 Connector Pin AssignmentsPCI-7200 Pin AssignmentsThe PCI-7200 comes equipped with one 37-pin D-Sub connector(CN2) located on the rear mounting plate and one 40-pin femaleflat cable header connector (CN1). The CN2 is located on the rearmounting plate; the CN1 is on front of the board. Refer section 2.4PCI-7200‘s layout.CN2 is used for digital inputs (DI 0 to DI 15) and digital outputs(DO 0 to DO 15) The reminding digital I/O channels DI 16 to DI 31and DO 16 to DO 31 are on CN1. The pin assignment of CN1 andCN2 is illustrated in the Figures 2-5 and 2.3.Legend:DO n Digital Output CH nDI n Digital Input CH nGND GroundACK ACK handshaking signalREQ REQ handshaking signalI_TRG Input signal to start DI data samplingO_TRG Output signal can be controlled by software