4-19 2000-OSM, F13. In steps 4 through 7, review the Cal Define & Cycle Time screen and make changes asnecessary.4. When the Method Table #01 (or other number you have chosen) appears, locate the specific lineyou want to change.5. If necessary, cursor to the Time column, and then cursor down to the line you want to edit.6. If you want to change the time, use the number keys to insert the new time. If this changes theplace of this line in the table, it will automatically move to the correct place when you leave theTime column.7. If you want to change the function, cursor right to the Function column and scroll up or down todisplay the new function.8. If you want to change the value, cursor right to the Value column and make the necessarychanges.9. When you have completed the changes, press the F1 (Exit) soft key.10. On the Method Table #01, press the F2 (Exit and Update) soft key to save your changes to themethod table.Printing a Method Table1. On the Background screen, press the F1 (Exit to Commands) soft key.2. On the Commands screen, cursor down to PRINTER and then press the F2 (Print Tables) softkey.3. On the Print Tables screen (see Figure 4-18), cursor to METHOD TABLE and then press the F2(Select Table) soft key.****** Print Tables ******[METHOD TABLE]TREND TABLETIME TABLEDIGITAL TABLERANDOM TABLEVISTA BASIC PROGRAMSTREAM TABLEPRESS. & TEMP.DIGITAL INS & OUTSPrintEscape SelectedTableF1 F2 F3 F4Figure 4-18. PRINT TABLES SCREEN
