6.6 Toolkits, DressPack/SpotPackGeneralAll service (repair, maintenance and installation) instructions contain lists of toolsrequired to perform the specified activity. All special tools, that is all tools that arenot considered standard as defined below, are listed in their instructionsrespectively.This way, the tools required are the sum of the Standard Toolkit and any toolslisted in the instruction.Standard toolkitThis standard toolkit contains a set of standard tools used for DressPack/SpotPack,3HAC17290-7.NoteToolArticle numberQty-Socket head cap, 5-17mm-1-Torx socket no: 20-60-1For Harting connectorsPhillips screwdriver, small-1For Harting connectorsFlat screwdriver, medium-1For water connectors on waterand air unitRing-open-end spanner 8-19 mm-2For Tension arm unit and waterconnectors on DressPackOpen end wrench, 27 mm.-1For water connectors onDressPackOpen end wrench, 36 mm-1Toolkit, water panelThis toolkit contains tools needed for water panel:NoteToolArticle numberQtyFor water panelSocket head cap 4 mm-1For water panelRing-open-end spanner, 36 mm-2Toolkit, cablesThis toolkit contains tools needed for work with cables:NoteToolArticle numberQtyArt. no. from HartingRemoval and Insertion tool for pins andsockets0999 000 0171 (D-sub)1Art. no. from HartingRemoval tool for pins and sockets0999 000 0012(HAN DD)1Art. no. from HartingRemoval tool for pins and sockets0999 000 0319(HAN EE)1Art. no. from HartingInsertion tool for pins and sockets0999 000 0059(HAN DD and HANEE)1Stripping pliers-1Continues on next pageProduct manual - DressPack/SpotPack IRB 6640 3353HAC028638-001 Revision: K© Copyright 2007-2018 ABB. All rights reserved.6 Reference information6.6 Toolkits, DressPack/SpotPack
