Product name principlesGeneralThe different robots have a wide range of options. In many cases the option namegives a good explanation of its content. In some cases there is a need to add moreinformation in the product name in order to clearly show a certain variant and toavoid misunderstandings. Hence a complementary naming standard is used.The family name of the options is DressPack (that is customer cables and hosesfrom the controller to the robot’s axis 6, divided in different sections).DressPack partsDressPack parts that are assembled on the robot are called:• IRBDP (IRB DressPack)Main applicationThe DressPack has been prepared for two main applications:ApplicationProduct nameMaterial handlingMHSpot weldingSWGenerationsThe different generations of a DressPack is indicated with a generation number.The number indicates the different design of each generation. (Some generationsmight not be available since it has been phased out).• 1, 2, 3 etcSectionsThe DressPack on the robot is supplied in different sections:SectionProduct nameLower DressPack sectionLUpper DressPack sectionUContinuous DressPackC(DressPack without an intermediate connection point)RoutingThe DressPack can be routed in different ways:RoutingProduct nameIntegrated DressPackIThe main parts are integrated within the robot structure.External DressPackEThe main parts are routed outside, on the robot structure.Continues on next page16 Product manual - DressPack/SpotPack IRB 66403HAC028638-001 Revision: K© Copyright 2007-2018 ABB. All rights reserved.Product name principles
