Installation74Moving and unpacking the unitWARNING! Follow the safety instructions, page 14. Ignoring the instructions cancause physical injury or death, or damage to the equipmentMove the transport package by pallet truck to the installation site.Unpack the package as follows:• Cut the bands (A).• Unpack the additional boxes (B).• Remove the outer sheathing by lifting it (C).• Remove the sheathing by lifting it (D).• Insert lifting hooks to the drive module lifting eyes and lift the module to theinstallation place.Description of the package contents1 Input cabling panel (option +H381 or +H383), see contents below.2 Output cabling panel (option +H381 or +H383), see contents below.3 Plywood support4 Drive module with factory installed options and multilingual residual voltage warning sticker, topguide plate, pedestal guide plate, telescopic ramp package, fastening screws in a plastic bag,external control unit with control cable clamp plate and factory installed optional modules, controlpanel with door mounting kit (option +J410), delivery documents, printed hardware manual andmultilingual quick start-up guide and manuals CD. Other printed manuals with options +R700 to+R7145 PalletBABA453DC21
