3Dlabs Wildcat4 User Manual

IntroductionWelcome to 3Dlabs!Thank you for selecting a 3Dlabs® Wildcat4TM Graphics Accelerator Card!This User Guide is designed to provide information about Wildcat4 Graphics Accelerator Cards. Inaddition to this guide, you are strongly encouraged to use the online help included in the 3Dlabs driversoftware Help screens.System Requirements Intel® AGP 8x motherboard Microsoft Windows 2000 (SP2) or Windows XP (32-bit). AGP Pro 50 expansion slot Note: For maximum performance, the card should only be installed insystems that support AGP 3.0 at 8x speeds. One open PCI slot adjacent to the AGP Pro 50 slot 128 MB minimum, 512 MB (or greater) recommended for best performance Industry-standard, multiple-frequency monitor (VGA) or a Digital Video Interface (DVI-I)compliant digital display device 3 MB of free space on the computer’s primary system disk for the video display driver softwareNOTE: If you purchased your Wildcat4 Graphics Accelerator Card as part of a system, itwas preconfigured to operate in your system prior to shipment. No othermodifications are necessary. Also, your system’s video drivers were installed priorto shipment and are operative when you receive the system. No further installationor configuration is necessary unless you purchased a customer kit or need toreinstall your video card. Store the driver delivery media that came with yoursystem in a safe place in case you ever need to reinstall the drivers.For more detailed information on the operating system, refer to Microsoft’s web site or to the printeddocumentation delivered with the system.3Dlabs Graphics Accelerator Card User's Guide2