3Dlabs Wildcat4 User Manual

Software ConfigurationThe 3Dlabs Wildcat4 DriverThe 3Dlabs Wildcat4 driver software allows you to optimize the working relationship between your card,your system, and your applications.This chapter contains instructions for configuring the video display, stereo display, and dual monitors.Configuring the Video DisplayOnce the Wildcat driver is installed properly, the Display Properties dialog box will have two additionaltabs: Wildcat Configuration and Wildcat Monitor.Using the Wildcat Configuration tab1. Make sure you are logged into the non-VGA version of Windows. Refer to Windowsdocumentation or online Help for instructions, if necessary.2. Close any open applications.3. Right click on the Windows desktop (or left click if you’ve altered the default mousesetup) and choose Properties from the menu. Click the Settings tab, then click Advanced.4. Click the Wildcat Configuration tab if it is not already displayed. On the WildcatConfiguration tab: Click Hardware Info to view the current hardware settings. Click View Config to view your current display configuration. Click Config Wizard to activate a step-by-step interface that will help you modify yourcurrent display configuration or create a new one. On the Wildcat Configuration Wizard,click Next and follow the prompts to create a new configuration, or modify or delete anexisting one. See “Enabling application-specific optimizations” and “Creating a customconfiguration” later in this chapter for more information.3Dlabs Graphics Accelerator Card User's Guide 17