3Com Switch 4500 Family Manual

Also see for Switch 4500 Family: Product guide Datasheet Getting started guide Datasheet Datasheet

Contents

3Com Switch 4500 Family Manual Manual pdf 824 page image

1-7DescriptionUse the display debugging command to display enabled debugging on a specified device or the wholeFabric.Examples# Display enabled debugging on unit 1. display debugging unit 1IP icmp debugging is onRip packet debugging switch is onRip receive debugging switch is onRip send debugging switch is ondisplay versionSyntaxdisplay versionViewAny viewParametersNoneDescriptionUse the display version command to display the version information about the switch system.Specifically, you can use this command to check the software version and release time, the basichardware configuration, and some other information about the switch.Examples# Display the version information of the system. display version3Com CorporationSwitch 4500 26-Port Software Version 3Com OS V3.03.00s56Copyright (c) 2004-2008 3Com Corporation and its licensors, All rights reserved.Switch 4500 26-Port uptime is 0 week, 0 day, 6 hours, 35 minutesSwitch 4500 26-Port with 1 Processor64M bytes DRAM8196K bytes Flash MemoryConfig Register points to FLASHCPLD Version is CPLD 003Bootrom Version is 3.01[Subslot 0] 24 FE + 4 GE Hardware Version is 00.00.00