1-6Absence of the size buffersize argument indicates that all trap information is displayed.Examples# Display the status of the trap buffer and the records in the trap buffer. display trapbufferTrapping Buffer Configuration and contents:enabledAllowed max buffer size : 1024Actual buffer size : 256Channel number : 3 , Channel name : trapbufferDropped messages : 0Overwritten messages : 0Current messages : 19#Apr 1 23:55:35:859 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227762, ifAdminStatus is 1, ifOperStatusis 1#Apr 1 23:55:36:059 2006 Sysname L2INF/2/PORT LINK STATUS CHANGE:- 1 -Trap 1.3.6.1.6.3.1.1.5.4(linkUp): portIndex is 4227794, ifAdminStatus is 1, ifOperStatusis 1……info-center channel nameSyntaxinfo-center channel channel-number name channel-nameundo info-center channel channel-numberViewSystem viewParameterschannel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of thesystem.channel-name: Channel name, up to 30 characters in length. The name must start with an English letter,containing no special character but numbers and English letters only.DescriptionUse the info-center channel name command to name the channel whose number is channel-numberas channel-name.Use the undo info-center channel command to restore the default name of the channel whosenumber is channel-number.By default, the name of channel 0 to channel 9 is (in turn) console, monitor, loghost, trapbuffer,logbuffer, snmpagent, channel6, channel7, channel8, channel9.Do not configure two different channels with the same name.
