1-3to: Specifies multiple contiguous VLAN IDs. The VLAN ID after to cannot be less than that before to.all: Displays the information about all the VLANs.dynamic: Displays information about the dynamic VLANs (which are registered through GVRPprotocol).static: Displays information about the static VLANs (which are created through manual configuration).DescriptionUse the display vlan command to display the information about the specified VLANs or all VLANs.z If the vlan-id argument is specified, information about the specified VLAN will be displayed.z If the vlan-id argument is not specified, the VLAN IDs of all the existing VLANs will be displayed.z If the dynamic or static keyword is specified, this command displays the amount and VLAN IDs ofthe dynamic or static VLANs.Related command: vlan.Example# Display the information about VLAN 1. display vlan 1VLAN ID: 1VLAN Type: staticRoute Interface: configuredIP Address: 192.168.0.39Subnet Mask: 255.255.255.0Description: VLAN 0001Name: VLAN 0001Tagged Ports: noneUntagged Ports:GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6GigabitEthernet1/0/7 GigabitEthernet1/0/8 GigabitEthernet1/0/9GigabitEthernet1/0/10 GigabitEthernet1/0/11 GigabitEthernet1/0/12GigabitEthernet1/0/13 GigabitEthernet1/0/14 GigabitEthernet1/0/15GigabitEthernet1/0/16 GigabitEthernet1/0/17 GigabitEthernet1/0/18GigabitEthernet1/0/19 GigabitEthernet1/0/20 GigabitEthernet1/0/21GigabitEthernet1/0/22 GigabitEthernet1/0/23 GigabitEthernet1/0/24Table 1-2 Description on the fields of the display vlan commandField DescriptionVLAN ID VLAN IDVLAN Type VLAN type (dynamic or static)Route InterfaceWhether the VLAN interface of the VLAN is configured as a routeforwarding interface (Whether an IP address is assigned to the VLANinterface)IP Address Primary IP address of the VLAN interfaceSubnet Mask Subnet mask of the IP address of the VLAN interfaceDescription Description string of the VLAN
