Displaying and Maintaining IP Performance Configuration 93Displaying andMaintaining IPPerformanceConfigurationAfter the above configurations, you can execute the display command in anyview to display the running status to verify your IP performance configuration.Use the reset command in user view to clear the IP, TCP, and UDP traffic statistics.Table 54 Display and maintain IP performanceOperation Command RemarksDisplay TCP connectionstatusdisplay tcp status You can execute the displaycommand in any view.Display TCP connectionstatisticsdisplay tcp statisticsDisplay UDP trafficstatisticsdisplay udp statisticsDisplay IP traffic statistics display ip statisticsDisplay ICMP trafficstatisticsdisplay icmp statisticsDisplay the currentsocket information ofthe systemdisplay ip socket [ socktypesock-type ] [ task-id socket-id ]Display the forwardinginformation base (FIB)entriesdisplay fibDisplay the FIB entriesmatching the destinationIP addressdisplay fib ip_address1 [ { mask1 |mask-length1 } [ ip_address2 {mask2 | mask-length2 } | longer ] |longer ]Display the FIB entriesfiltering through aspecific ACLdisplay fib acl numberDisplay the FIB entries inthe buffer which beginwith, include or excludethe specified characterstring.display fib | { begin | include |exclude } regular-expressionDisplay the total numberof the FIB entriesdisplay fib statisticsClear IP traffic statistics reset ip statistics You can execute the resetcommand in user view.Clear TCP traffic statistics reset tcp statisticsClear UDP trafficstatisticsreset udp statistics
