3Com 4210 PWR Configuration Manual

Also see for Switch 4210 9-Port: Getting started Getting started Datasheet Configuration guide

Contents

3Com 4210 PWR Configuration Manual Manual pdf 361 page image

SNMP Configuration Examples 359[4210] snmp-agent trap enable standard authentication[4210] snmp-agent trap enable standard coldstart[4210] snmp-agent trap enable standard linkup[4210] snmp-agent trap enable standard linkdown[4210] snmp-agent target-host trap address udp-domain 10.10.10.1 udp-port 5000 params securityname publicConfiguring the NMSThe Switch 4210 supports 3Com’s Netork Management System (NMS). SNMPv3adopts user name and password authentication. When you use 3Com’s NMS, youneed to set user names and choose the security level in [AuthenticationParameter]. For each security level, you need to set authorization mode,authorization password, encryption mode, encryption password, and so on. Inaddition, you need to set timeout time and maximum retry times.You can query and configure an Ethernet switch through the NMS. For moreinformation, refer to the corresponding documentation provided by the NMSproduct.n Authentication-related configuration on an NMS must be consistent with that ofthe devices for the NMS to manage the devices successfully.