3Com 3C13755-US - Router 5642 Installation Manual

Also see for 3C13701: Installation guide Quick reference guide Installation guide Getting started guide Module guide

Contents

3Com 3C13755-US - Router 5642 Installation Manual Manual pdf 62 page image

60 CHAPTER 4: INSTALLING THE R OUTER■ Cablesn Ethernet cablen Console cablen AUX cablen Power supply (for the Router 5012), power cord and chassis ground wiren Interface cables for the selected interface modules■ Equipmentn A routern Optional SICs and MIMsn Ethernet 100BASE-T Hub or LAN switchn Channel service unit/data service unit (CSU/DSU) or other datacommunications equipment (DCE) equipment (such as a modem)n Configuration terminal, such as a PCn Additional equipment for the selected interface modules6Mounting the Routerin a RackThe Router 5232, Router 5642, and Router 5682 can be mounted in a standard19-inch rack. To install a router in a rack:1 Check the grounding condition and stability of the rack. Secure the fasteningbrackets to both sides of the front and rear panels of the router.2 Place the router on one of the trays in the rack. Move the router into positionalong the guide rail in the rack.3 Ensure that the router is level and securely fixed. Use pan head screws to fastenthe brackets to the rack. The pan head screws should be anti-rust and shouldsatisfy the rack installation requirements.4 Ensure that the ventilation holes are not obstructed.Figure 62 Rack-Mounting a RouterPanhead screw19" rack BracketGuide