2N - VoiceBlue LiteWindows 98SE/ME/2000/XP OS. While installing the driversplease following the instructions below:• Insert the included CD into your PC CD-ROM drive.• Connect the USB cable to the PC and then to VoiceBlue Lite.• The Windows OS recognises the connected deviceautomatically and asks for suitable drivers.• Find the VoiceBlue Lite drivers on the CD included in thedelivery in the following directory: CDROM:\VoiceBlue\USBdrivers.• The OS recognizes the right drivers automatically and startsinstalling them.The OS may also require the USB COM port drivers. They areavailable in the same CD directory as mentioned above.The VoiceBlue Lite gateway operates as a modem in the datamode, communicating through a virtual COM port. The gatewayUSB port default parameters are 921,600 bps, 8 data bits, noparity, 1 stop bit, and no flow control. If you intend to use the USBcable for distances longer than 5 meters, you are recommended touse the USB hubs..Fig. 5 – Direct PC Connection Using USBThe serial port transmission rate is 57,600 bps, the remainingcommunication parameters are the same. Set the communicationparameters on the PC side identically.13VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
