Fig. 58 – Main XAPI server windowAt the beginning of configuration is needed to setup thecommunication of XAPI server with the gateway. Click to “Set” inthe main XAPI window and then choose “Module-PBX” item. Inthe PBX settings disable COM port by selecting “---“ and clickOK (see Fig. 59)Fig. 59 - Communication configurationAfter that setup the COM port the GW is connected to. (Serialconnection is recommended for Voice Callback.) For setup of theCOM port click the “SMS“ button and than “Set“ button or “Set”in the main XAPI window and then choose “Module-SMS” item.In SMS setup window select “Ext. gates” and configureparameters of connected gateway such as port the gateway isconnected to, baud rate, user name and password. At the end donot forget to choose the VCC automat for processing of incominginformation from the gateway. (See Fig. 60). At the end confirmchanges by clicking “OK“ button.102VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
