Fujitsu ETERNUS AF250 Setup Manual

Also see for ETERNUS AF250: Safety precautions Configuration guide Configuration guide Configuration guide Configuration guide

Contents

operation and maintenance

Setup GuideSetup GuideFUJITSU StorageETERNUS AF250 All-Flash ArraysP3AG-1862-02ENZ0An installation space and network environment must be prepared in advance.Prepare the following manuals:● Manuals for the ETERNUS AF250● Related manuals, such as manuals for the server or the networking equipment that is usedInstallation SpaceSite Planning GuideNetwork Environment• Configuration Guide (Basic)• Configuration Guide (Web GUI)PreparationSTEPInstallation spaceCheck that the installation area meets the space requirements of the rack in which the ETERNUS AF250 (hereafterreferred to as "ETERNUS AF") is to be installed.Environmental considerations for installationCheck if the installation area for the ETERNUS AF meets the environmental conditions and installation environmentconditions.Power outletsCheck the type and the number of power outlets/sockets that are required to install the ETERNUS AF.Completing and attaching the Network Settings labelWrite down the IP address for the ETERNUS AF on the Network Settings label and attach it inside the rack.Settings for the PC● Set up the network environment- IP address : 192.168.1.2- Subnet mask : 255.255.255.0● Set the Web browserRefer to "Configuration Guide (Web GUI)" for details on the settings that are required.