N-Tron 1000 Series Hardware Guide 1-1Introduction and Specifications Revised 2015-03-24Section 1 Introduction and SpecificationsIntroductionThe N-Tron 1000 Series Unmanaged Industrial Gigabit Ethernet Switches support high speed layer 2 switchingbetween ports. This series of switches are housed in a ruggedized aluminum enclosure, and provide Category-5compliant 10/100/1000Base-T connections for high performance network design, and hub/repeater upgrades.All fiber products utilize the IEEE compliant LC duplex connectors for fiber optic communications in a convenientSFP (Small Form Pluggable) modular design. All 10/100/1000Base-T ports utilize the RJ45 shielded connectors.The 1002MC/MCE is a two port unmanaged media converter that converts 10/100/1000Base-T copper to1000BaseSX/LX full duplex fiber.The 1003GX2/GXE2 is a three port unmanaged switch that offers one 10/100/1000Base-T copper port and two1000BaseT/SX/LX full duplex copper/fiber ports.The 1005TX is a five port unmanaged switch that offers five 10/100/1000Base-T copper ports.The 1008TX is an eight port unmanaged switch that offers eight 10/100/1000Base-T copper ports.Key Features• Compact Space Saving Package• Full IEEE 802.3 Compliance• Unmanaged Operation• Jumbo Frame Support (1005TX and 1008TX only)• Extended Environmental Specifications• -40°C to 85°C Operating and Storage Temperature• Supports Full/Half Duplex Operation• Up to 16.0 Gb/s Maximum Throughput• MDIX Auto Sensing Cable• Auto Sensing Speed and Flow Control• Full Wire Speed Communication• Store-and-Forward Switching Technology• Redundant Power Inputs (10-30 VDC, 10-49VDC for 1008TX)• LED Link/Activity Status Indication• Hardened Metal Enclosure• Industry Standard 35mm DIN Rail Mounted EnclosureBuy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com