barfield DPS1000 User Instruction Manual

Also see for DPS1000: User instruction manual User instruction manual User instruction manual

Contents

barfield DPS1000 User Instruction Manual Manual pdf 73 page image

56-101-01175March 18, 2015 Page 63Appendix E: Tablet App Wi-Fi Connect ProcedureIf the tablet does not already have the “Barfield ADTS” installed, proceed with the followingstep(s), otherwise skip to step 2 below:1. If application is not installed on the tablet, continue with the following step “1-a”, otherwiseskip to step “2” below.A. Installing “Barfield ADTS” app on tabletB. For Apple iOS select “App Store”, for android tablet select “Play Store”C. Search for “Barfield ADTS”D. Select “install”2. Connecting the Tablet Wi-Fi to DPS1000 Test SetBefore trying to connect the tablet to the test set, verify the test set power ON andoperational or at a minimum after the initial Barfield logo screen is displayed and replacedby the initialization status window.Note: Before launching the Barfield ADTS app, the tablet Wi-Fi connection must beestablished with the Test Set.A. Select SettingsB. Set Wi-Fi to “1” ONC. View Wi-Fi Networks to identify the Test Set you are trying to connect to. The DPS1000will be identified as “DPS1000_00xxx” where “xxx” is the S/N of the Test Set.iPad Example Android ExampleFigure 58 Wi-Fi Settings Screen ExampleD. Select the DPS1000_00xxx Test SetE. If prompted for a password, enter “barfield” (all lower case).F. Wait to verify that Wi-Fi Networks lists the “DPS1000_00xxx” as ConnectedG. Continue with step “3” below.