56-101-01175March 18, 2015 Page 9CHAPTER 3: INSTALLATION1. ASSEMBLYA. PackageCarefully unpack the test set and make a visual inspection of the tester for evidence ofdamage that might have occurred during shipping. The user should take inventory of thepackage contents to insure the following items are there:(1) DPS1000 Pitot Static Test Set P/N 101-01175(2) Hose kit P/N 115-00632 composed of:(a) 1 each Blue 25 ft Hose with quick disconnect and 1 tethered plug for STATIC(Ps) port connection, P/N 115-00630.(b) 1 each Red 25 ft Hose with quick disconnect and 1 tethered plug for PITOT (Pt)port connection, P/N 115-00629.(c) Carrying Bag, P/N 195-00020.(3) Instruction Manual P/N 56-101-01175 (this doc)(4) Power Cord, 90 degree, 115VAC, P/N AE9887-ND.B. EnclosureThe test set is encased in a Copolymer injection molded case comprised of upper andlower sections and is depicted in Figure 5:(1) The lower section of the case supports the panel assembly.(2) The upper section is a removable lid.(3) The case is equipped with a One-touch extension handle and wheels for carry-on ease.(4) The case is the Largest legal airline carry-on size.(a) Height: 9.0 in. (22.86 cm)(b) Width: 14.8 in. (37.6 cm)(c) Length: 22.2 in. (56.38 cm)(d) Weight: 35 lbs. (15.9 kg)Figure 5 Case Dimensions