Zodiac Vortex 3.2 Instructions For Installation And Use Manual

Contents

Zodiac Vortex 3.2 Instructions For Installation And Use Manual Manual pdf 10 page image

H03839‐00.B2 EN – 2013‐09 94.4 Displaying the programmed cycles To display the days on which the cleaning cycles have already been programmed, press the buttonquickly. Every day's programme will be displayed for 3 seconds:5. Remote control (Vortex™ 4 4WD)5.1 Using the remote controlBy default, the remote control is already synchronised with the control box. To power on the remote control press the button for a long time (3 seconds). The screen displays the remotemode: 2 possible functions :‐ Pilot the cleaner: Hold the remote control unit and move it in the desired direction using the movementsillustrated below: Remove the cleaner from the water: Press the button quickly. The message is displayed on thescreen. The cleaner moves toward the wall and climbs up to the waterline. To turn off the remote control press . The remote control is switched off but the cleaner continues tooperate.For the communication between the control box and the remote control to be optimal, make sure to placethe control box on the caddy. Orient the control box towards the pool, and make sure there is no obstaclebetween the control box and the pool. The frequency of the flashing of the led located on the remote controlindicates the reception quality.ForwardLeft turn Right turnSTOPBackwards