Zodiac Vortex 3.2 Instructions For Installation And Use Manual

Contents

Zodiac Vortex 3.2 Instructions For Installation And Use Manual Manual pdf 14 page image

H03839‐00.B2 EN – 2013‐09 137.3 Pre‐diagnosis in the event of a malfunction (Vortex™ 3 4WD , Vortex™ 4 4WD)8. Product complianceThis appliance has been designed and built according to the following standards:Low voltage directive: 2006/95/ECElectromagnetic compatibility directive: 2004/108/ECEN 55014‐1: 2000 +A1:2001 +A2:2002 ; EN 55014‐2: 1997 +A1:2002EN 60335‐1: 2002 + A1:2004 + A2:2006 +A11:2004 + A12:2006 ; EN 60335‐2‐41: 2003 + A1:2004Relative to which it is compliant.The product has been tested under the normal conditions of use.Zodiac Pool Care Europe hereby declares that this product is in compliance with the essential requirements andother pertinent dispositions of the R&TTE 1999/5/EC directiveSAFETY STANDARDS:The cleaners are classified by the ETL as being compliant with the appropriate requirements ofIEC 60335‐2‐41.If your cleaner malfunctions you have access to a menu which gives some indications on the status of yourcleaner. This information can be used by your reseller to troubleshoot a possible breakdown. To access the menu the cleaner must not be operational and the display must be on. Press on and simultaneously for at least 5 seconds.This is the information that is displayed in order every 3 seconds: The total cleaner operating time (in hours), example display: The last cleaner error code (if the cleaner has had at least one error), example display: The cleaner operating time at the error (if the cleaner has had at least one error), example display:Once this information has been displayed, the control box returns to the menu, with the screen on:

/ 16

Related manuals for Zodiac Vortex 3.2