Zodiac Vortex 3.2 Instructions For Installation And Use Manual

Contents

Zodiac Vortex 3.2 Instructions For Installation And Use Manual Manual pdf 9 page image

H03839‐00.B2 EN – 2013‐09 84.3 Programming cleaning cycles Before programming the cleaning cycles, select the type of cycle you need : Vortex™ 3 4WD : Vortex™ 4 4WD : To programme a cycle, press the button for a longer time (3 seconds). The led stops flashing The days of the week flash twice. The LED and the current date and time flash. This is a reminder of the current date and time you enteredin order to help you to programme. Press to start programming. Select the day to programme using the and buttons. Validate using the button. Once the day has been memorised, the hour flashes: Select the hour to programme using the and buttons. Validate using the button Once the hour has been memorised, the minutes flash: . Select the minutes to programme using the and buttons. Minute programming operates in quarterhours (Example : 12:00  12:15 12:30 12:45…). Validate using the button The next day starts flashing for an eventual programme: . A short press on or exits from the menu.‐ You can create up to 7 cleaning cycles, either as 7 cycles in a row, or as the same cycle repeated overseveral weeks (example: every Wednesday and Saturday for 3 weeks)‐ After completion of the 7th cycle the LED will turn off.If the LEDs flash it means that the time setting is not complete. To continue with the cleaningcycle programming, it is essential to set the time first. To do this follow the instructions in § 4.1.To cancel programming use the button: Long press "on the settings menu": deletion of the programming for the day that is flashing. Long press "outside the settings menu": deletion of all programming.The display switches off for 1 second to indicate that the programming has been deleted.