909 Network ConfigurationStatic AddressSteps Screenshot1. Right‐click anywhere in the previewinterface, and then choose Menu >Network > Basic.2. The Network Configuration interface isdisplayed.3. Double‐click an NIC to configure its IPaddress, subnet mask, and defaultgateway.4. Click OK.NOTE！After the NIC eth0 is configured, system servicesare restarted.PPPoESteps Screenshot1. Right‐click anywhere in the previewinterface, and then choose Menu >Network > PPPoE.2. The PPPoE configuration interface isdisplayed.3. Enable PPPoE, and enter the usernameand password provided by the ISP. Theobtained network information is shownin the bottom area of the interface.
