Menu
Zeta NPAD 2 User Manual, Maintenance Manual & Log Book
Also see for Premier AD: Installation manualUser manual, maintenance guide & log bookInstallation manual
                        | |
Contents
| 
PREMIER AD USER MANUAL, MAINTENANCE GUIDE & LOG BOOKApproved Document No: GLT.MAN-106A PAGE 22Issue: 2.00 Authorised: GH Date: 16/07/2007Commissioning CertificateI/we being the competent person(s) responsible (as indicated by my/our signatures below) for thecommissioning of the fire alarm system, particulars of which are set out below, CERTIFY that the saidwork for which I/we have been responsible complies to the best of my/our knowledge and belief with therecommendations of Clause 39 of BS5839-1:2002, except for the variations, if any, stated in this certificateName (in block letters): Position:Signature: Date:For and on behalf of:Address:Postcode:The extent of liability of the signatory is limited to the system described below.Extent of the installation work covered by this certificate.Variations from the recommendations of clause 39 of BS 5839-1:2002 (see clause 7)All equipment operates correctlyCertificate of COMMISSIONING for the Fire Alarm System installed at:Premier ADAddress:Installation work is, as far as can be reasonably ascertained, of an acceptable standardThe entire system has been inspected and tested in accordance with the recommendations of 39.2.cof BS 5839-1: 2002.The system performs as required by the specifications prepared by:Taking into account the guidance contained in section 3 of BS 5839-1: 2002, I/we have notidentified any obvious potential for an unacceptable rate of false alarms.The documentation described in Clause 40 of BS 5839-1:2002 has been provided to the userThe following work should be completed before/after (delete as applicable) the system becomes operationalThe following potential causes of false alarms should be considered at the time of the next service visit:Before the system becomes operational, it should be soak tested in accordance with the recommendationsof Clause 35.2.6 of BS 5839-1:2002 for a period of: (enter a period of 1 week, the periodrequired by the design specification, or the period recommended by the signatory to this certificate,whichever period is the greatest, or delete if not applicable) |
Related manuals for Zeta Premier AD
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved