Zanussi ZWWM25W804A User Manual

ENGLISH 23●●●●NOTELoad the laundry and add detergentand fabric softener. Make sure the loadsize does not exceed the maximumdrying capacity of the machine.1.Turn the knob to set a wash programwhich can select drying option (refer toProgram Chart on page 11), accordingto your clothes then press Modetouchpad to switch your machine toWash + Dry Mode.2.Set the drying time by pressing“Time Dry ” touchpad repeatedlyuntil desired drying time reached.The display will then show the wholeduration of wash & dry cycle.4.Start the program by pressingStart/Pause touchpad. The timeremaining is updated every minute onthe display.5.At the end of the program press theOn/Off button to switch the machineoff.6.Select the required options bypressing the relevant touchpads. Ifpossible, do not select a spin speedlower than that proposed by themachine to avoid unnecessary longerdrying time therefore saving energy.3.At the end of the program press theOn/Off button to switch the machine off.6.7.2 Washing Program + “Time Dry ” OptionNOTESome drying level options are notavailable for some programs.If you set only 10 minutes of drying,the appliance performs only aCooling phase.● When “Iron Dry ” option is selected,the display time will be adjusted afterapproximately 15 minutes from thestart of the program, based on thelaundry type and load size.The display will show the new adjustedtime.● When “Extra Dry ” or “CupboardDry ” is selected the display timewill be adjusted towards the end of thedrying cycle when machine sensesrequired dryness level has beenachieved. In case of laundry quantitylower than maximum load capacity,the time remaining can suddenlydecrease from e.g. approximatelyminutes to .If you wish to open the door during theanti-crease phase or interrupt it, pressStart/Pause touchpad.If you wish to open the door duringthe anti-crease phase or interrupt it,press Start/Pause touchpad.At the end of each drying cycle,the temperature of your clothingwill be high. For your safety,please leave the door open to letyour clothes cool beforeremoving your laundry.At the end of each drying cycle,the temperature of your clothingwill be high. For your safety,please leave the door open to letyour clothes cool beforeremoving your laundry.If a program is not compatiblewith the drying option selected,the symbol “ ” will flash ondisplay.