Zanussi ZWT816PCWA User Manual

xyyCupboard door preparationFor countersinking the door, it is recom-mended to call a professional.Align the cupboard door to the furniture correctly.Measure the distance X to fix the height of the holeto countersink the upper hinge. The centre of thehole Y should be at the same height of the stroke onthe hinge support.16-22 mm22±1,5 mm449mm595-598 mmØ 35 mm12,5 - 14 mmSet the position of the lower hole respecting dimen-sions and distances shown in the drawing (449mm).Countersink the holes.AHingesTo mount the hinges it is necessary to drill two holes(dia. 35 mm, depth 12.5 - 14 mm depending on thedepth of cupboard door) on the inner side of thedoor.The hinges will be fixed to the door by means of thefour supplied screws A.max. 105°To align the door perfectly, make surethat the edge of cupboard door is par-allel with the appliance edge and to re-spect the proper opening angle (max.105 °C).13