Yamaha ACC-GNRST-30-20 Installation Manual

Also see for EF3000iSE - Inverter Generator - 3000 Maximum AC Output: Theory & diagnostics guide Owner's manual Owner's manual Owner's manual Owner's manual

2. PREPARATION:Make certain that generator is cool beforeprogramming the remote start kit circuit board forthe new key fob. Generator components can beextremely hot and cause serious burns to skin.• Place generator on a secure flat surface.• Clean the generator before beginninginstallation.INTRODUCTION:This QuickStart Remote Key Fob is designed to be used as a replacement or additional remotecontrol only for the QuickStart Remote Start Kit (part number ACC-GNRST-30-00) installed on anEF3000iSE/EF3000iSEB generator. Follow the instructions provided with the QuickStart RemoteStart Kit for proper use of this key fob.Please read and understand these instructions completely before installation to avoid possibleinjury to yourself, or damage to the accessory or generator.• This installation should be performed by an authorized Yamaha dealer or a qualified mechanic.• The QuickStart Remote Start Kit has been tested and approved by the FCC and RSS, and isintended for sale in the United States and Canada ONLY.DEALER:These instructions contain important information for future reference and must be given to thecustomer.WARRANTY INFORMATION:• This Genuine Yamaha accessory is covered by a 1-year warranty against defects in material orworkmanship. Labor for replacement of defective components is not covered. See yourYamaha dealer for a copy of the warranty statement.1. PARTS LIST:This kit contains the following component. Before beginning installation confirm there are nomissing or damaged components.Item # Part Number Description Qty1 ACC-GNRST-30-20 Key fob transmitter 1INSTALLATION INSTRUCTIONSQuickStart Remote Key FobACC-GNRST-30-20EF3000iSE/EF3000iSEB2008 Page 1 of 4 PAK-GNRST-30-20_D

/ 4

Related manuals for Yamaha EF3000iSE - Inverter Generator - 3000 Maximum AC Output