Yamaha ACC-GNRST-30-20 Installation Instructions Manual

Also see for EF3000iSE - Inverter Generator - 3000 Maximum AC Output: Theory & diagnostics guide Owner's manual Owner's manual Owner's manual Owner's manual

2. PREPARATION:Make certain that generator is cool beforeprogramming the remote start kit circuit board forthe new key fob. Generator components can beextremely hot and cause serious burns to skin.• Place generator on a secure flat surface.• Clean the generator before beginninginstallation.INTRODUCTION:This QuickStart Remote Key Fob is designed to be used as a replacement or additional remotecontrol only for the QuickStart Remote Start Kit (part number ACC-GNRST-30-00) installed on anEF3000iSE/EF3000iSEB generator. Follow the instructions provided with the QuickStart RemoteStart Kit for proper use of this key fob.Please read and understand these instructions completely before installation to avoid possibleinjury to yourself, or damage to the accessory or generator.• This installation should be performed by an authorized Yamaha dealer or a qualified mechanic.• The QuickStart Remote Start Kit has been tested and approved by the FCC and RSS, and isintended for sale in the United States and Canada ONLY.DEALER:These instructions contain important information for future reference and must be given to thecustomer.WARRANTY INFORMATION:• This Genuine Yamaha accessory is covered by a 1-year warranty against defects in material orworkmanship. Labor for replacement of defective components is not covered. See yourYamaha dealer for a copy of the warranty statement.1. PARTS LIST:This kit contains the following component. Before beginning installation confirm there are nomissing or damaged components.Item # Part Number Description Qty1 ACC-GNRST-30-20 Key fob transmitter 1INSTALLATION INSTRUCTIONSQuickStart Remote Key FobACC-GNRST-30-20EF3000iSE/EF3000iSEBINSTRUCTION TO THE USERThis device complies with Part 15 of the FCC Rules.Operation of this device is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply with the limits for a Class B digital device, pur-suant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference when the equipment is operated in a commercial environment. This equipmentgenerates, uses, and can radiate radio frequency energy and, if not installed and used in accordancewith the instruction manual, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equip-ment does cause harmful interference to radio and television reception, which can be determined byturning the equipment on and off, the user is encouraged to try to correct the problem by one or moreof the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.• Consult the dealer or an experienced radio/TV technician for help.The user is cautioned that changes and modifications made to the equipment without the approvalof manufacturer could void the user’s authority to operate this equipment.4/2008 Page 1 of 4 PAK-GNRST-30-20_D

/ 2

Related manuals for Yamaha EF3000iSE - Inverter Generator - 3000 Maximum AC Output