5.9 Setting standard CPU parameters5.9.1 Parameterization via Siemens CPUSince the CPU is to be configured as Siemens CPU 317-2 PN/DP (6ES7317-2EK14-0AB0 V3.2) in the Siemens hardware configurator, the standard parametersof the VIPA CPU may be set with "Object properties" of the CPU during hardware config-uration. Via a double-click on the CPU 317-2 PN/DP (6ES7 317-2EK14-0AB0 V3.2) theparameter window of the CPU may be accessed. Using the registers you get access toevery standard parameter of the CPU.5.9.2 Parameters CPUThe CPU does not evaluate each parameter, which may be set at the hardware configu-ration. The parameters of the following registers are not supported: Synchronous cycleinterrupts, communication and web. The following parameters are currently supported:n Short description– The short description of the Siemens CPU is CPU 317-2 PN/DP (6ES7317-2EK14-0AB0 V3.2).n Order No. / Firmware– Order number and firmware are identical to the details in the "hardware catalog"window.n Name– The Name field provides the short description of the CPU.– If you change the name the new name appears in the Siemens SIMATIC Man-ager.n Plant designation– Here is the possibility to specify a plant designation for the CPU.– This plant designation identifies parts of the plant according to their function.– Its structure is hierarchic according to IEC 1346-1.n Location designation– The location designation is part of the resource designation.– Here the exact location of your module within a plant may be specified.n Comment– In this field information about the module may be entered.Parameterization via Sie-mens CPUSupported parametersGeneralVIPA System 300S+Deployment CPU 317-4PN23Setting standard CPU parameters > Parameters CPUHB140 | CPU | 317-4PN23 | en | 18-0152
