YASKAWA MP2000 Series User Manual

Also see for JAPMC-MC2100: User manual User manual

Contents

YASKAWA MP2000 Series User Manual Manual pdf 8 page image

viii Installation Wiring Never use the Machine Controller in locations subject to water, corrosive atmospheres, or flammable gas,or near burnable objects.There is a risk of electrical shock or fire. Do not step on the Machine Controller or place heavy objects on the Machine Controller.There is a risk of injury. Do not block the air exhaust port or allow foreign objects to enter the Machine Controller.There is a risk of element deterioration inside, an accident, or fire. Always mount the Machine Controller in the specified orientation.There is a risk of an accident. Do not subject the Machine Controller to strong shock.There is a risk of an accident. Check the wiring to be sure it has been performed correctly.There is a risk of motor overrun, injury, or an accident. Always use a power supply of the specified voltage.There is a risk of burning. In places with poor power supply conditions, take all steps necessary to ensure that the input power supplyis within the specified voltage range.There is a risk of device damage. Install breakers and other safety measure to provide protection against shorts in external wiring.There is a risk of fire. Provide sufficient shielding when using the Machine Controller in the following locations.There is a risk of device damage. Noise, such as from static electricity Strong electromagnetic or magnetic fields Radiation Near to power lines When connecting the battery, connect the polarity correctly.There is a risk of battery damage or explosion. Only qualified safety-trained personnel should replace the battery.If the battery is replaced incorrectly, machine malfunction or damage, electric shock, or injury may result. When replacing the battery, do not touch the electrodes.Static electricity may damage the electrodes.CAUTIONCAUTION