3500 Flat Panel Industrial PCs545. Attach the power cable making sure that the system’s enclosure is groundedthrough the power cable.6. Implement the proper grounding techniques. Establish a ground path from theunit chassis to the enclosure chassis. A 6-32 threaded ground point hole isprovided on the bottom panel of the unit.7. Tighten the 12-#10 nuts to 25 lbs-inch (2.8 Newton-meters) (28Kgf cm).System Cutout Dimensions3510(T)/3512(T)1.315 [33.40].315 [8.00]2.150 [54.61]6.150 [156.21]10.150 [257.81]12.300 [312.42]1.650 [41.91]5.150 [130.81]8.650 [219.71]10.300 [261.62] 11.670 [296.42]9.630 [244.60]ø.250 [ø6.35]Figure 3-23. 3510/3512 System Cutout Dimensions (inches [mm])
