Xerox WorkCentre 5020 System Administrator Manual

Also see for WorkCentre 5020: User guide Specification Specifications User guide Detailed specifications

Contents

Xerox WorkCentre 5020 System Administrator Manual Manual pdf 47 page image

USB Port47USB PortThis section explains how to set up the machine in a USB port environment. Thefollowing information is provided:Information Checklist – page 47USB Port Environment – page 47USB Port Installation – page 48Information ChecklistBefore starting the USB port installation procedures, make sure that the following itemsare available or have been performed.NOTE: The installation procedures will install the machine on the USB port of the hostcomputer. The procedures are not intended to connect the host computer to othercomputers.NOTE: Use CentreWare Internet Services to set [Auto Eject Time]. Refer toUSB PortCommunication Setup on page 48.If problems are encountered during the installation of the machine, refer toProblemSolving on page 75.NOTE: Do not connect the USB cable to the machine until instructed to do so.USB Port EnvironmentSystem configurationThe machine can be connected directly to the USB port of a host computer. Adocument file can be sent from the host computer via the USB port to the machine forprinting. Other computers can be connected via a network to the host computer. Eachcomputer has a queue that can hold a number of files.The document file is sent from the queue in the computer to the queue in the hostcomputer, and then onto the queue in the machine to be printed.Target computersThe following computers support printing through the USB port.• Windows 2000/Windows XP/Windows Server 2003/Windows VistaItem ByUSB Cable CustomerTest the machine to make sure that it is fully installed and functioningcorrectly.CustomerInstall the print driver. Customer