Xerox WorkCentre 5016 User Manual

Also see for WorkCentre 5016: User guide Specification

Contents

Xerox WorkCentre 5016 User Manual Manual pdf 31 page image

Switching On / OffXerox WorkCentre 5016/5020 User Guide31Switching On / OffThis section describes how to switch the machine on and off, and explains the PowerSaver feature.The machine is ready within 27 seconds after the machine is switched on. The timerequired for the machine to warm up may vary, depending on the machine configurationand the machine environment.The machine automatically enables the Power Saver feature during inactivity tominimize power consumption. It is recommended to switch off the machine at the endof the day or when it is not in use for a long period of time.Important • Switching off the machine may cause loss of data currently being processed.For information on the Power Saver feature, refer to "Power Saver" (P.32)Switching OnThe following procedure describes how to switch on the power to the machine.1. Press the Power Switch to the[ ] position.Note • [1] appears in the Display whenthe machine is ready.• If you attempt to run a job duringwarm-up, the job will be processedonce the machine is ready.Switching OffThe following procedure describes how to switch off the power to the machine.Important • Switching off the machine may cause loss of data currently being processed.1. Before switching off the machine, make sure that all jobs have been processedcompletely.Important • Never switch off the machine in the following instances:-While data is being received-While jobs are being printed-While jobs are being copied-While jobs are being scanned2. Press the Power Switch to the [ ]position.Important • After pressing the Power Switch tothe [ ] position, wait for a fewseconds before removing thepower cord from the power outletuntil the machine powers offcompletely.• After switching off the machine,wait for a few seconds beforeswitching the machine back onagain.Downloaded From ManualsPrinter.com Manuals