Xerox WorkCentre 5016 User Manual

Also see for WorkCentre 5016: User guide Specification

Contents

Xerox WorkCentre 5016 User Manual Manual pdf 102 page image

Paper JamsXerox WorkCentre 5016/5020 User Guide102Paper JamsThis section describes procedures to clear paper jams.When paper jams in the machine, the machine stops, and the indicator on the MachineDiagram (mimic) flashes. An error code also appears in the Display, which indicateswhich procedures to take to remove the jammed paper.Carefully remove the jammed paper without tearing it. Do not leave any pieces of paperin the machine.If a paper jam error code remains in the Display after you have removed the jammedpaper, it is possible that paper is jammed in another location in the machine or thatpieces of paper are still left in the machine. Check the Machine Diagram (mimic) andthe error code, and remove the jammed paper completely.After removing the jammed paper, a copy job or print job resumes automatically fromthe page where the paper jam occurred.Important • Identify the location of the paper jam first. Randomly pulling out the trays may tear thejammed paper, and any torn pieces of paper remaining in the machine may eventuallycause the machine to malfunction.• If there are any torn pieces of paper left in the machine, the error code remains in theDisplay.• Clear the paper jams while the machine is switched on.• Do not touch any parts inside the machine while clearing paper jam unless specificallyinstructed to do so.E1: Paper Jam around the Fuser Unit and in the Left Side CoverThe following procedure describes how to clear paper jams around the Fuser Unit or inthe Left Side Cover when an error code [E1] appears in the Display.Important • Do not touch the transfer corotron wire when removing the jammed paper. Touching thetransfer corotron wire can possibly damage the wire itself, which may require replacementor impair image quality.1. Lift up the Left Side Cover Latch gentlyto open the Left Side Cover.Downloaded From ManualsPrinter.com Manuals