Xerox WorkCentre 4260S User Manual

Also see for WorkCentre 4260 Series: Features Specifications Quick use guide Evaluator guide User guide

Contents

Xerox WorkCentre 4260S User Manual Manual pdf 187 page image

11 SetupsXerox WorkCentre 4260 User Guide 179Setting up Paper TraysPaper SettingsDefault StockThe Default Stock settings allows the programming of the default paper type andcolor. Typically, this is the most common stock that will be used in the machine andis the stock that the machine will feed if a specific stock type is not selected.Tools > Paper Tray Management > Paper Setting > Default StockPaper SubstitutionThis feature enables the machine to automatically substitute common US andmetric paper sizes when printing.If the feature has been turned off, the machine will hold the job and indicate thatthe appropriate paper size should be loaded. If this feature is set to On, themachine will automatically substitute the sizes shown on the screen below.Tools > Paper Tray Management > Paper Setting > Paper SubstitutionDefault Paper SizeThe Default Paper Size settings allows the programming of the default paper size.Set the default size to either 8.5 x 11" (refers to Letter and Legal sizes) or A4 (297x 210mm).Tools > Paper Tray Management > Paper Setting > Default Paper Size