Xerox WorkCentre 4260S User Manual

Also see for WorkCentre 4260 Series: Features Specifications Quick use guide Evaluator guide User guide

Contents

Xerox WorkCentre 4260S User Manual Manual pdf 167 page image

10 Paper and other MediaXerox WorkCentre 4260 User Guide 159the settings. If the settings are correct, select the Confirm button. Please referto Setting the Paper Size in the Paper and other Media chapter on page 163..Using the Bypass TrayThe bypass tray is located on the right side of your machine. It can be closed whennot in use, making the product more compact. Use the bypass tray to printtransparencies, labels, envelopes or postcards in addition to making quick runs ofpaper types or sizes that are not currently loaded in the paper tray. Acceptableprint media is plain paper from 3.9" x 5.8" to 8.5" x 14" (98 mm x 148 mm to 216mm x 356 mm) and weighing between 16 lb and 43 lb (60 g/m² and 163 g/m²).Loading the Bypass Tray1. Lower the bypass tray, located on the right side of the product and unfold thepaper support extension.L Remove any curl onpostcards and labelsbefore loading them intothe Bypass Tray.2. Prepare a stack of paper for loading by flexing or fanning them back andforth. Straighten the edges on a level surface.3. Load the print material with theprint side facing down and againstthe right edge of the tray.NOTE: Hold transparencies by theedges and avoid touching the printside.Bypass Tray