Xerox Phaser 3635MFP Quick Use Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide User guide Evaluator guide

Xerox Phaser 3635MFP Quick Use Manual Manual pdf 8 page image

4 quick use guideSwitch On the MachineOnce the machine has been assembled it must be configured. This is done usingthe Product Enablement Key when the machine is switched on for the first time.The Product Enablement Key isdelivered in a plastic tube insidethe box with the machine. Theprocedure to configure themachine is as follows:1 Locate the tube containing theProduct Enablement Key.Remove the plastic card andcarefully press out the key.2 Connect the Power Cord to themachine and a suitable power supply outlet.3 Switch on the machine.4 Install the Product Enablement Key into the Card Reader Slot at the back of themachine.5 The Language Default screen will be displayed. Select your chosen languageand then select Save.6 The Installation Wizard screen will be displayed. Select Next.7 The Product Enablement Settings screen will be displayed. Follow theinstructions on the screen.NOTE: When the Green LED light stops blinking and remains on continuously(about 10 seconds), the configuration is successful.8 Remove the Product Enablement Key and select Next on the display.9 The Default Paper Size screen is displayed. Select either A4 or 8.5 x 11 inchesand select Next.Product Enablement KeyCard Reader slotGreen LED