Xerox DocuPrint P8E User Manual

Contents

Xerox DocuPrint P8E User Manual Manual pdf 25 page image

Setting Up Your Printer • 131-4-5 Installing the RCP and SM ProgramsThe Windows Remote Control Panel (RCP) program allows you to viewand change print settings for DOS applications from the Windows screen.The Status Monitor is a program that runs in the background andautomatically displays messages on your computer screen whenever theprinter status changes. It is not available for Windows NT.Windows 3.1x/95/98 (RCP&SM):1 Insert the Setup Diskette for RCP&SM into your computer’s floppydrive.2 Run Setup.exe from the diskette and follow the on-screeninstructions to complete the installation.Windows NT 4.0 (RCP):1 Insert the Setup Diskette for Windows NT 4.0 into your computer’sfloppy drive.2 Run Setup.exe in the diskette’s NTRCP folder and follow the on-screen instructions to complete the installation.DOS (RCP&SM):1 Turn on your computer.2 Insert the Setup Diskette for RCP&SM into your computer’s floppydrive.3 At the DOS prompt, enter the following commands:md dosrcp (creates a dosrcp directory)cd dosrcp (changes to the dosrcp directory)copy a:\dosutil\*.* (copies files from the diskette)dosp8e.bat (installs RCP&SM)