P a p e r J a m s6-36 v D o c u P r i n t 4 5 1 7 / 4 5 1 7 m p U s e r G u i d eTray Jam-Open All Traysalternating withOpen Front CoverRemove Jam SheetMisfeed Jam at Startup1. Remove all trays (1).2. Remove the Envelope Feederif installed.3. Open the front cover (2).4. Remove the jammed paper.5. Replace all trays.6. Close the front cover.7. Replace the Envelope Feeder ifnecessary.Various(fuser jam)Fuser Jam Clearance1. Power OFF the printer anddisconnect the power cord.2. Open the rear cover.3. Let the fuser area cool for 40minutes.4. Remove the Duplex Module, ifinstalled.5. Remove the screw at the leftside of the fuser cover (1).6. Flip down the fuser cover.7. Remove the jammed paper.8. Close the fuser cover andreplace the screw.9. Replace the Duplex Module, ifremoved.10. Close the rear cover.11. Plug in the power cord andpower ON the printer.Table 6.4 Paper jam messages and corrective actions (continued)Control PanelMessage Type of Paper Jam/Remedial ActionTable 6.4 Page 7 of 7hapter6.frm Page 36 Friday, July 11, 1997 8:20 PM
