Page 34 Xerox WorkCentre Pro/CopyCentre User GuideFaxing Documents (Optional Feature)1. Load your Originalsl If using the Document Feeder...Place either 1 or 2 sided originals into the DocumentFeeder face up, with page one on top. The originals shouldbe in good condition, and without staples or paper clips.Adjust the edge guides against the original. Otherwise, thecopies may print incorrectly or the originals may jam.For fastest performance, place the originals Long EdgeFeed with the top of the document away from you.l If using the Document Glass...Raise the Document Glass Cover.Place the original face down into the top left corner of theglass. Ensure that the top left corner of the original fits intothe corner of the registration edge.Press Clear AllIf necessary, press the Clear All ( )button to reset theselections that were made for the previous job.NOTE The system has an Image Rotation feature that enables youto feed originals Long Edge Feed (LEF) even if thedestination Fax can only print Short Edge Feed (SEF).Document FeederEdge GuidesDocument Glass