Page 28 Xerox WorkCentre Pro/CopyCentre User GuideMaking Copies1. Load your Originalsl If using the Document Feeder...Place the originals into the Document Feeder face up, withpage one on top. The originals should be in goodcondition, and without staples or paper clips.Adjust the edge guides against the original. Otherwise, thecopies may print incorrectly or the originals may jam.For fastest performance, place the originals Long EdgeFeed with the top of the document away from you.l If using the Document Glass...Use the Document Glass to copy bound, stapled, folded orwrinkled originals, odd or oversize documents, books, orglossy photographs.Raise the Document Glass Cover.Place the original face down into the top left corner of theglass. Ensure that the top left corner of the original fits intothe corner of the registration edge.When using the copy features; Auto Paper, Auto%, AutoCentre, or Bound Originals, the cover must be raised.Press Clear AllIf necessary, press the Clear All ( )button to reset theselections that were made for the previous job.Document FeederEdge GuidesDocument Glass