48 •Making copies XEROX WIDE FORMAT COPY SYSTEMREADY position at the completion of the scan. When the DOCUMENTRETURN feature is set to REAR, the Scanner delivers the document tothe rear Stacker at the completion of the scan.Some documents will always exit to the rear at the completion of thescan regardless of the DOCUMENT RETURN setting. These documentsinclude:• Thick documents• Documents longer than 5 feet (1.52 meters)• Documents over 36 inches (914 mm) in widthMODE:MANUALThe user must enter the width of the document manually, and verycarefully center the document when inserting it into the Scanner. Thedocument is prescanned in this mode.AUTOWIDTHAUTOWIDTH enabled is the default setting. When AUTOWIDTH isselected, the Scanner automatically detects the width of thedocument.AUTOWIDTH/AUTOCENTER. The document is prescanned inthis mode.When AUTOWIDTH/AUTOCENTER is enabled, the Scannerautomatically centers the image and automatically detects the documentwidth.PRODUCTIVITY - ANSIPRODUCTIVITY is only available on Scanners with AccXES firmware10.0 or higher, Scanner firware 3.2.5 and the Productivity DocumentFeed Tray that includes discrete width sensors. PRODUCTIVITY - ANSIis the default. Other media type selections include ARCH, ISO A, ISO B,JIS B and CUSTOM. These selections must be made so that the sensorsdetect the correct width. This feature eliminates the prescan widthmeasurement, which increases document throughput speed resulting ingreater productivity. CUSTOM requires standard media sizes to beentered in CUSTOM MEDIA FORMATS.AUTOWIDTH and AUTOWITH/AUTOCENTER are not available in thismode.Reference Menu, CONFIGURATION>SCANNER CONTROL, MODE: foradditional information.
